![]() Apple recommends using a Thunderbolt port on the left-hand side of the MacBook Pro for best results. Once you’ve gone through the steps to enable eGPU support (if required), you can plug the eGPU unit into one of your Thunderbolt 1, 2 or 3 ports. This site for more advice as the method may change over time and with subsequent updates to macOS. Now execute the following commands in Terminal:.Once you are logged in, plug in the eGPU.Boot from the external USB drive (hold down the Option/Alt key when you start up your Mac and select EFI Boot).You will need to format the USB stick first. Copy the EFI folder onto a FAT32 formatted USB stick.Get the automate-eGPU EFI v1.0.5 package.Before you start make sure the eGPU is disconnected. ![]() Rather than installing a patch, running a script, and altering the OS, you can now just download an automate-eGPU EFI zip file, copy it to a USB thumb drive and boot from it. However, you no longer need to go to these lengths. Just be aware that there is a possibility that you could damage your Mac, requiring you to re-install MacOS from scratch and losing all your files in the process – so make sure you back-up any important data you have on the device before proceeding. That said, we did find it necessary to disable system integrity protection and run a script to alter macOS. Installing the patch requires Admin privileges but is fairly straightforward and doesn’t require too much tech knowledge. When we first set up our Mac to work with an eGPU it was necessary to download and install a patch. So don’t move to the next step before backing up. As you will see from the next step, if everything goes wrong you may need to reinstall MacOS, losing all your data in the process. Here’s how to use a Blackmagic eGPU with an older Mac:īefore you begin we recommend that you back up your Mac. We didn’t use an external display in our test, as we’re more interested in video and photography editing app performance. With Mojave running, you also no longer require to have an external display connected for it to work – unless you want to of course. You can use High Sierra as well, but the latest OS offers a simpler way to choose which apps use the external eGPU hardware when it is connected. You also need to be running the latest macOS, which at the time of writing is MacOS Mojave 10.14.5. You’ll also need a separate Thunderbolt 2 to 2 cable in addition, but it’s likely you already have one if you have previously plugged anything into your Thunderbolt port. There are some third party adapters, but we would recommend sticking to Apple’s own one which we know works – and should continue to work after any software updates (£49/$49,īuy it here). If like us, you want to use an eGPU with an older MacBook, with a Thunderbolt 2 or even version 1 interface, the first thing you will require is a USB-C to Thunderbolt adaptor. The format might appear after the label Kind, such as ”Kind: Matroska Video File.” You can also search by the filename extension, which is the letters shown at the end of the file's name, such as .avi, .wmv, or .mkv.Before you start, make sure you buy the correct hardware and that you have a compatible Mac. On Mac, you might be able to identify the media format by selecting the file in the Finder, then pressing Command-I to open an Info window. If you know the name of the media format, include it in your search. After updating, if you don't have an app that supports the older or specialized media format used by the file, search the internet or App Store for an app that does. Install all available software updates for your Mac and software updates for your iPhone or iPad. Older or specialized formats might not work as expected if your device, its operating system, or the app you're using doesn't support the format. Some apps prefer specific formats, but most formats work in most apps without additional software. Apple apps such as Photos, iMovie, Safari, Keynote, and QuickTime Player work with many media formats.
0 Comments
Leave a Reply. |